Painting and installing trim

Amáda has finished painting every room. I’m installing the trim I cut and marked earlier. Doing the job right means not skipping any steps. We’re carefully priming and painting each piece of trim with multiple coats.

Final hardware installed

I install the final hardware pieces around the finished basement, including door knobs, vent grilles, light trim kits, switch plate covers, and more. In the bathroom, I install a toilet paper holder and towel holders. I hang bi-fold doors in the laundry room and bedroom. I also install some last minute trim and touch up paint in a few areas.

Structured media panel finished

Today I completed the structured media enclosure. Over the last 6 years we’ve had to rebuild half of house, so we took the opportunity to upgrade our household telephone, cable, and CAT6 networks. Everything is patched from this panel.

A structured media enclosure inset into a wall with the door closed.
A structured media enclosure inset into a wall with the door open showing patch panels for telephone, cable TV, a household computer network, security camera system, as well as a modem and Wi-Fi router.

6 years later, it’s finally DONE.

A flipper swindled us, resulting in over $100,000 in house repairs. We spent years undoing his predatory remodeling, rebuilding the house ourselves, and blogging every step of the way. Debt, depression, and therapy will continue for years to come. But today the reconstruction project passed its final inspection from the city building official. I can’t stop sobbing. It’s done. The ordeal is officially done.

Floorplan for a finished basement showing 2 bedrooms, a full bathroom, family room, and a laundry room.
A finished basement without furniture, showing recessed lighting, wood grain vinyl flooring, and double French glass doors.
Double French glass doors in a bedroom.
Two closets in a garden-level basement bedroom with an egress window.
Two empty closets with the doors open showing closet organizing systems and bright LED lighting.
Panoramic view of a bedroom showing double French doors, two closets each with double doors, and an egress window.
A finished basement laundry room with wood plank vinyl flooring, white laundry machines, white cabinetry, laundry tub, a refrigerator, and a commercial rolling shelf.
A finished basement laundry room with wood plank vinyl flooring, white laundry machines, white cabinetry, laundry tub, and a refrigerator.
A bathroom vanity with a marble top, two sinks, two oval mirrors, ornate sconce lighting, and two monogrammed towels.
A bathroom with a tiled shower and towel bars mounted to the back of the door.
And empty family room with a TV mount and structured media panel. The rest of the room is empty.
An egress window in a basement bedroom.
A bare closet shown without doors or shelving.
The underside of a staircase has an arched support, and is finished with textured paneling.
A pet portal is a small archway that allows pets to move between rooms, even when doors are closed.
Beneath a staircase, a pair of crates are used as drawers. The underside of the staircase if finished with textured paneling.

Now, we can move back into the lower level, knowing that it is correct, complete, and there are no more hidden problems hidden by a flipper. This signed building permit is the proof that this awful ordeal is finally done and over with.

A building permit that has passed final inspection, signifying that the project is done.

A story in 11 pictures

Here is the same view from the bottom of the stairs as seen over the years.

Basement photo dated 10/01/2012 showing its condition when the flipper bought the house. A load bearing column was in place.
A basement room showing the condition of the house when a flipper put it back on the market in May of 2013. A load bearing column has been removed and is missing from the photo.
Photo of a finished basement dated June 2013 when demolition begins. Some drywall is missing from one stud wall.
A finished basement with partially demolished drywall and a soffit dated August 2013.
A finished basement as seen in January 2014 with a load bearing column replaced under a central beam.
A finished basement undergoing demolition as seen in this photo dated November 2017.
An empty basement with bare walls prepared for drain tile installation.
A stud wall is installed in an unfinished basement as seen in February 2018.
Panoramic view of an unfinished basement with bare stud walls as seen in December 2018.
A panoramic photo of a partially finished basement with unpainted drywall, dated March 2019.
Panoramic view of a finished basement as seen in May of 2019.

What’s next?

I’m going to continue working on local, state, and federal legislation to prevent predatory remodeling and providing real consequences for flippers who practice it.

Will we find more problems that the flipper hid? Maybe. But not on this level of the house.

Flipper screwed into the side of the microwave!

The microwave has died. It’s the same microwave that came with the house when the flipper sold it to us. I started to uninstall it when I noticed something crazy. Normally, an over-the-range microwave hangs from the wall cabinets above. But because the flipper used recycled cabinets, the overhead cabinet is riddled with holes, making it too weak to hang another microwave.

Kitchen wall cabinet for hanging an over-the-range microwave has many holes in the bottom from supporting multiple microwaves in the past.

The flipper’s solution was to hold up the weight of the machine by screwing directly into the side of the microwave with drywall screws! We’ve been living with it this way for over 6 years! No real estate inspector would have ever spotted this hazard.

Drywall screw puncturing the side of a microwave housing.
Drywall screw puncturing the side of a microwave housing.
Side of a microwave that has a hole from a screw.

I uninstalled the dead microwave, ordered a replacement, and reinforced the swiss cheese cabinet with several pieces of plywood inside and out. I installed the replacement microwave in the same spot.

Space where an over-the-range microwave would be installed below some kitchen wall cabinets.